Floor stickers
Anti slip stickers that stay put, clean easily, and keep designs looking sharp.
What are floor stickers?
These floor stickers have an anti-slip finish, are rated R9 according to the DIN 51130:2014 and are BS 7976 certified, making these stickers safe for sticking to high-traffic zones.
The textured, anti-scuff finish also minimises glare making your design pop.
A permanent adhesive makes these graphics stick well but also removable without damaging your floor.
Suitable for indoor use up to 1 year or temporary outdoor use.
Floor stickers are digitally cut in any shape around your design.
You can choose any size from 2cm to 70cm wide by up to 500cm long.
Get a squeegee, tape & instructions included to make these floor stickers super easy to apply.
The tough anti-slip laminate provides protection so you can also wipe these stickers down to remove dirt & marks. They’re resistant to scratches, water, cleaning chemicals and from fading in sunlight.
How we ensure you get perfect stickers
We guarantee
If you aren’t satisfied with your stickers, we’ll make them right with a reprint or refund*
Free proofs
We send proofs before printing so you know your design will print exactly as you want.
Free shipping
Our custom stickers ship fast, in only 4 days after you approve your design proof.
Helpful people
Experienced print experts, designers and lots of helpful people are keen to give you advice.
Stunning quality
Our HP Indigo, the Rolls Royce of digital printers, and our laser cutter gives incredible quality & speed.
Product reviews
Floor stickers that work and last
Many floor stickers peel or fade after a few weeks. Ours are made to handle busy spaces. They’re printed on tough vinyl, finished with a certified anti slip coating, and stick firmly without damaging your floors. Whether you need wayfinding, promotions, or safety signs, they stay sharp through cleaning, sunlight, and daily foot traffic.
What are floor stickers?
Floor stickers are custom printed floor graphics designed to stick directly to the ground. They’re sometimes called floor decals or printed floor graphics. They’re made with a textured, anti slip vinyl surface so they’re safe to walk on, even in busy retail environments or other public spaces.
These stickers are rated R9 under DIN 51130:2014 and BS 7976 certified, which makes them a perfect solution for areas where safety matters. The textured surface also reduces glare, keeping your design sharp and visible from every angle.
How do we make them tough
Floor stickers go through more wear and tear than ordinary stickers, so they need to be made differently. These stickers use a permanent adhesive that holds firm on the floor but still peels up cleanly when you’re ready to remove them.
The vinyl and laminate material we use is built for the highest quality performance. It’s resistant to scratches, water, cleaning products, and even sunlight. Indoors, they’ll stay looking sharp for up to a year, and they’re strong enough for short-term outdoor use as well.
Shapes and sizes you can choose
Sizes range from tiny decals as small as 2cm to large strips up to 500cm. That means you can order small graphics for promotions, bold arrows for wayfinding, or giant logos to brand an open space.
We cut them into any custom floor shape to match your design. From simple square shapes and circles to die cut logos or arrows, you can get exactly what you need.
How to apply floor stickers
- Clean and dry the floor to remove dust, oils, or debris.
- Position the sticker using the tape guide included in your order.
- Peel the backing, start from one edge, and press the sticker down.
- Use the squeegee to smooth from the center outward to avoid bubbles.
- Check the edges and press firmly to ensure full adhesion.
Floor stickers can be walked on immediately after application.
How to remove floor stickers
- Lift one corner of the sticker with your fingers or a plastic scraper.
- Peel back slowly at a low angle to release the adhesive cleanly.
- If the floor is cold or the sticker has been down for a long time, warm the surface slightly to make removal easier.
- If any adhesive remains, wipe it off with a mild adhesive remover or warm soapy water.
The adhesive is designed to remove without damaging smooth, well-sealed floors.
Where to use floor stickers
Floor stickers are versatile, which makes them useful in almost any setting:
- Retail environments, shopping centers, events, exhibitions, gyms, and offices.
- Safety signs, wayfinding arrows, queue markers, social distancing graphics, and temporary directions.
- Decorations for themed spaces, kids’ areas, or campaigns where floor graphics add to the experience.
FAQs
How long do floor stickers last?
Floor stickers last up to 12 months indoors, depending on foot traffic and cleaning routines. In high-traffic areas, expect several months of strong performance.
Can I use floor stickers outdoors?
Yes, but only for short-term use. They handle weather and foot traffic for a limited time, so they’re best for temporary outdoor events.
Will floor stickers damage my floor?
No. The adhesive is strong but designed to remove cleanly from smooth, well-sealed floors. If you’re unsure, test a small sample first.
What surfaces can floor stickers stick to?
They stick best to smooth floors like concrete, sealed wood, laminate, vinyl, polished stone, and ceramic tiles. Textured or uneven surfaces can reduce adhesion.
Can I put floor stickers on tiles?
Yes. They work well on smooth tiles. If the tile is textured or has deep grout lines, adhesion may vary.
Are floor stickers slip-resistant?
Yes. They’re R9 slip rated under DIN 51130:2014 and BS 7976 certified, which makes them safe for public areas and high-traffic zones.