How to remove sticker residue from any surface

Product team
July 4, 2025
7 mins
Placeholder image
Blog
News
How to remove sticker residue from any surface

Sticker residue is surprisingly stubborn. Even after you remove the sticker, a thin layer of sticky residue often stays behind. It clings to glass, plastic, metal, and other surfaces, and basic cleaning with soap and water usually isn’t enough.

Luckily, there are simple and effective ways to remove sticker residue using items you probably already have at home. We’ll look at the best methods for different materials, so you can get rid of the mess without damaging the surface.

Best methods for removing sticker residue

Different types of sticker residue need different approaches. Some adhesives dissolve with rubbing alcohol, while others respond better to oils or heat. Before you start, consider the surface—what works on glass might not be safe for wood or fabric. The methods below are effective, easy to apply, and work across various surfaces.

If you're working with waterproof stickers, you may need a little extra time or heat, since these are made to resist moisture and hold up longer.

Isopropyl alcohol

Isopropyl alcohol is one of the most effective ways to break down sticker residue. It works well on glass, metal, and some plastic surfaces. You can also use it on electronics like laptops, just avoid getting liquid near any ports.

  • Soak a corner of a clean cloth or a piece of cotton wool with rubbing alcohol.
  • Press it against the sticky residue and leave it to sit for 1–2 minutes.
  • Gently rub or gently scrape the area with a plastic scraper or an old credit card.
  • Repeat if needed until the residue is gone.
  • Wipe clean with a damp cloth.

Baking soda paste

Baking soda is a gentle but effective way to remove sticker residue, especially on plastic, wood, and other surfaces where you want to avoid harsh chemicals. The mild abrasive action helps lift the adhesive without scratching.

  • Mix baking soda with a small amount of cooking oil or water to form a thick paste.
  • Apply the paste directly to the sticky area.
  • Leave it to sit for 5 to 10 minutes.
  • Gently scrub the spot with a soft cloth or soft-bristled brush.
  • Wipe clean with a damp cloth and dry the surface.

Washing-up liquid and warm water

Washing-up liquid mixed with warm water is a safe and simple option for loosening light sticker residue, especially on glass, plastic, and ceramic surfaces. It’s also a good first step before trying stronger methods.

  • Mix warm water with a few drops of washing-up liquid in a bowl or sink.
  • Soak a cloth or piece of cotton wool in the solution and place it on the sticky area.
  • Leave it to sit for several minutes to soften the adhesive.
  • Gently rub the area with the cloth or use a plastic scraper if needed.
  • Wipe clean with a damp cloth and dry the surface.

Olive oil or cooking oil

Olive oil and cooking oil are great natural options for softening sticker residue without damaging the surface. They’re especially useful on plastic, glass, wood, and areas near food, since they’re non-toxic.

  • Apply a few drops of olive oil or cooking oil directly to the sticky residue.
  • Leave it to sit for 10 to 15 minutes to loosen the adhesive.
  • Use a soft cloth or cotton wool to gently rub the area.
  • If needed, gently scrape with a plastic scraper or old credit card.
  • Clean off any remaining oil with washing-up liquid and water, then wipe clean with a damp cloth.

Peanut butter

Peanut butter might seem like an odd choice, but it’s surprisingly effective for removing sticker residue. The natural oils help break down the adhesive, and the thick texture keeps it in place while it works. Best for non-porous surfaces like smooth glass and some plastics. Avoid using on porous ceramics or unfinished surfaces, as the oils may stain.

  • Spread a small amount of smooth peanut butter (not crunchy) over the sticky residue.
  • Leave it to sit for 10 to 30 minutes, depending on how stubborn the adhesive is.
  • Use a soft cloth to gently rub the area in circles.
  • Wipe clean with a damp cloth, then wash the surface with washing-up liquid to remove any oily residue.

Hairdryer method (heat)

Using a hairdryer is one of the safest ways to loosen sticker residue, especially on surfaces like glass, metal, plastic, and car paint. The heat softens the adhesive, making it easier to peel off without harsh chemicals.

  • Set a hairdryer to low or medium heat.
  • Hold it a few inches above the sticker residue and gently warm the area for 30 seconds to 1 minute.
  • Once the adhesive softens, gently scrape with a plastic scraper or your fingers.
  • If residue is left, follow up with rubbing alcohol or washing-up liquid to clean the area.
  • Wipe clean with a damp cloth and dry the surface.

Magic eraser

A magic eraser can help remove sticker residue from smooth, durable surfaces like glass, metal, and plastic. It works as a micro-abrasive and should be used with caution. Avoid on coated, polished, or glossy surfaces, as it can cause dulling or scratching.

  • Dampen the eraser with water and squeeze out excess liquid.
  • Gently scrub the area using light pressure.
  • Check the surface as you go to make sure it’s not being scratched.
  • If needed, follow up with washing-up liquid or rubbing alcohol to remove any remaining residue.
  • Wipe clean with a soft or damp cloth and dry the area.

Eucalyptus oil

Eucalyptus oil is a natural solvent that works well on sticker residue, especially on glass, metal, and some plastic surfaces. It’s less harsh than chemical removers and leaves a fresh scent.

  • Add a few drops of eucalyptus oil to a piece of cotton wool or a clean cloth.
  • Dab it onto the sticky area and leave it to sit for a few minutes.
  • Gently rub the residue with the cloth until it lifts away.
  • Clean the surface with mild washing-up liquid and water to remove any oily film.
  • Wipe clean with a soft cloth and dry the area.

(The rest of the article is already localised and doesn’t need structural changes — let me know if you want me to continue with it in this same format.)

How to remove sticker residue by surface type

Some surfaces need extra care. Stickers are especially hard to remove if you sealed them in some way. Below are quick tips for choosing the safest and most effective method depending on the material you're working with.

Glass

  • Use a razor blade carefully to lift residue, especially after heating or softening.
  • White vinegar or rubbing alcohol work well without leaving streaks.
  • Avoid abrasive pads that can scratch the surface.

Plastic

  • Stick to oil-based methods or a baking soda paste to avoid damage.
  • Avoid using acetone or any nail varnish remover on plastic. These solvents can melt, cloud, or discolour the surface.

Wood

  • Use a gentle approach with olive oil or white vinegar.
  • Avoid soaking or heavy scrubbing to prevent warping or stripping the finish.
  • Consider using a wood polish after cleaning to restore shine.

Metal & stainless steel

  • Isopropyl alcohol and eucalyptus oil both work well for breaking down adhesives.
  • For stainless steel, always follow the grain and avoid abrasive materials to prevent streaks or scratches.

Laptops & electronics

  • For laptops and other electronics, use isopropyl alcohol with a microfibre cloth, applying small amounts to avoid liquid damage.
  • A magic eraser can help, but test first.
  • For stubborn spots, gently warm the area with a hairdryer before wiping.

Clothes & fabric

  • Use rubbing alcohol or white vinegar to break down adhesive before washing.
  • Make sure all sticker residue is gone before putting the item in the tumble dryer, as heat can set the glue.

Painted walls

  • Use washing-up liquid or a vinegar spray applied with a soft cloth.
  • Use a very soft cloth and minimal moisture. Even gentle cleaners can damage low-quality or aged paint. Test in a small area first.
  • Avoid hard scrubbing to prevent peeling or dulling the paint.

Commercial products that work

If home remedies aren't enough, there are several commercial adhesive removers that can handle even the most stubborn residue. These products are designed to break down adhesives quickly and can save time on larger or tougher cleanup jobs.

1. Goo Gone

Available online in the UK, Goo Gone works well on glass, metal, plastic, and even some fabrics. Apply it with cotton wool or a clean cloth, leave it to sit for a few minutes, then wipe clean. Be sure to wash the area afterward to remove any oily residue.

2. Sticky Stuff Remover

A UK-based product designed for a wide range of surfaces, including wood, painted walls, and clothing items. It’s a good choice for delicate jobs where you don't want to use harsh chemicals.

3. Goof Off

A stronger solvent that can remove thick glue and sticker layers. Best for durable materials like metal or outdoor items. Use with caution—check the label before using on plastic or painted surfaces.

4. The Pink Stuff

A mildly abrasive paste cleaner that works well on ceramic, glass, and kitchen surfaces. Great for residue from labels on cookware or jars, though not ideal for soft materials.

5. WD-40

Though primarily a lubricant, it can also break down glue residue. Spray a small amount on the area, leave it to sit, then gently rub with a soft cloth. WD-40 can dissolve adhesives, but it’s petroleum-based. Clean the area thoroughly after use to avoid long-term residue or surface damage.

Tip: Always read product labels and test on an inconspicuous area first, especially on painted or delicate materials.

If you removed the sticker but don’t want to throw it away, read how to make stickers sticky again.

Final tips

Removing sticker residue is easier when you match the method to the surface. Always start with the gentlest option and leave it to sit to give it time to work. Be careful with products like acetone nail varnish remover or abrasive pads, as they can damage plastic, painted finishes, or soft materials.

Avoid soaking electronics or using too much heat on delicate surfaces. Once the residue is gone, wipe clean with a damp cloth to remove any leftover oils or cleaning products. With a little patience, even the most stubborn residue can be removed safely.

You removed your old sticker. Are you ready for the new commitment? If you want stickers that are easy to apply and easy to remove, check out Sticker it. Our die cut stickers are the most popular choice: they’re durable, look great, and peel off clean without leaving a mess.

Subscribe to our newsletter

Enter your email below to stay up to date on Sticker it's latest, including new product launches, exclusive deals and more.

By subscribing, you agree with our Terms.
Thank you! We'll send you the latest news, deals & tips.
Oops! Something went wrong while submitting the form.